As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Tivar® 88 UHMW (Ultra High Molecular Weight Polyethylene) is a specialized grade made specifically for bulk material handling. Dark blue in color, it is a versatile, cost-effective machinable plastic with extreme durability and exceptional resistance to abrasion, impact, and chemicals. Featuring an very low coefficient of friction, Tivar® 88 helps promote the smooth flow of cohesive or non-free flowing bulk solids. It is the ideal, proven solution when you need to reduce or eliminate arching, ratholing, and erratic material flow challenges in bins, bunkers, hoppers, chutes, and railcars. Looking for general-purpose or standard options? We also offer Natural Virgin UHMW and Reprocessed UHMW for traditional wear applications. Tivar® 88 is a premium glass-filled grade engineered to optimize bulk material flow and extend part life without the need for external surface coatings. It is the correct choice if you need: While both offer excellent impact strength, they are engineered for different purposes. Because Tivar® 88 is a premium glass-filled grade, it is highly abrasive to standard tooling. While it can be machined, cut, and drilled, carbide-tipped tools are strongly recommended to prevent rapid blade dulling. Note that its high toughness means it does not hold fine threads as well as stiffer plastics like Nylon or Acetal (Delrin®). Use coarse threads or metal inserts for best results. [PDF] Tivar® 88 UHMW Spec Sheet Reduce Bridging & Ratholing with Tivar® 88
Why Choose Tivar® 88?
Tivar® 88 vs. Virgin UHMW: Which Do You Need?
Fabrication & Machining
Related Articles
What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
© 2026 Interstate Advanced Materials A Curbell Plastics Company. All Rights Reserved.
Interstate Advanced Materials: 330 Commerce Circle, Sacramento, CA, USA
Curbell Plastics, Inc.: 7 Cobham Drive, Orchard Park, NY 14127
Phone:
888-768-5759
Customer Service Hours: Monday-Friday 9am-5pm PST
Our Locations:
Sacramento, CA |
Hayward, CA |
Los Angeles, CA |
Kent, WA |
Boise, ID |
Austin, TX |
Birmingham, AL |
Des Moines, IA |
Portland, OR
