Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Outrigger UHMW Crane Pads for Heavy Equpment | 1.5 in. Thick

Outrigger UHMW Crane Pads For Heavy Equpment | 1.5 In. Thick

Our Line Of Outrigger And Jack Pads Will Exceed Your Requirements.


Price for 1.50 x 12 x 12" Outrigger Pad" Qty: 1


* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $6/month with


UHMW composite outrigger pads avoid the problems of plywood and metal pads while providing a virtually unbreakable surface for weight load dispersal. They will not rot, splinter, absorb moisture, corrode, or rust. Lighter than steel and with a non-stick surface, UHMW outrigger pads operate between 180F to -250F and can handle compressive loads of up to 2500 pounds per square inch.

Standard color is black. Many colors available.


  • Virtually unbreakable
  • Compressive loads up to 2500 pounds per square inch
  • Works in sub zero temperatures
  • Waterproof and will not rust
  • Easy to mount and replace
  • Reduced downtime
  • Only 15% the weight of steel
  • Chemically inert
  • Serviceable from 180?F to -250?F
  • Non-stick surface
  • Easy to clean

Product Reviews


Material: UHMW
Specific Gravity (g/cc): 0.93
Water Absorption: 0.01% @ Saturation
Friction Coefficient: 0.14
Tensile Strength: 4000 psi
Tensile Modulus: 98 ksi
Flexural Modulus: 81 ksi
Flexural Strength: 2000 psi
Elongation: 200% @ Break
Izod Impact Strength: NB (ASTM D256 Type A)
Hardness: 67 (Shore D)
Compressive Strength: 2800 psi
Continuous Operating Temp: 180?F
Heat Deflection Temp: 116?F @ 264 psi
Melting Point: 275?F
UL94 Flammability: HB

Frequently Asked Questions

What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts

What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.

Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.