Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


See-Thru Two Way Mirror

See-Thru Two Way Mirror

Acrylic Mirror For Surveillance, Special Use And Theatrical Applications.

SKU: ACRCLEJSH

Price for .118 x 48 x 96" Mirror Sheet Qty: 1

$729.54


ESTIMATED SHIPPING TO 92111: $400.00
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $67/month with

Description

See-Thru Acrylic Mirror provided by Interstate Plastics is an ideal material for all surveillance, special use and theatrical applications. Also known as a "two-way mirror," the See-Thru Mirror transmits 5% to 20% of light, allowing only a percentage of incandescent light to pass through while reflecting the remainder. When the mirror is illuminated, the side facing the light source will stand reflective, leaving the darker side to view as transparent.

People also searched: Specialtygradeacr

  • Light transmission ranges from 5% to 20%

Product Reviews

Specifications

Material: ACRYLIC MIRROR
Specific Gravity (g/cc): 1.19 g/cc
Water Absorption: 0.4%
Tensile Strength: 11030 psi
Tensile Modulus: 490 ksi
Flexural Strength: 17000 psi
Izod Impact Strength: 0.4 ft-lbs/in.
Hardness: M95
Heat Deflection Temp: 203°F @ 264 psi
Melting Point: 300-315°F
Self Ignition Temp: 833°F
Linear Expansion Coefficient: 3 x 10-5 in./in./°F

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.



WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.