Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


Sea Green Corrugated Polycarbonate | 3

Sea Green Corrugated Polycarbonate | 3" Corrugation Width

High Performance Glazing Panels For Punishing Exterior Applications With A 3" Trapezoidal Corrugation.

SKU: POLEU3 SH


Save with our Volume Pricing:
QuantityPrice Each
10 - 19$36.70
20 - 49$34.66
50+$32.62

Price for SunTuf Sea Green .032" x 26" x 72" Qty: 1

$40.78


ESTIMATED SHIPPING TO 06828: $475
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $4/month with

Description

Note: Must be ordered in increments of 10. Orders of less than 10 sheets will be refunded.

SunTuf Corrugated Polycarbonate Panels have up to 20 times greater impact resistance compared to traditional fiberglass panels and the highest yellowing index, light transmission rates, load rating, and wind uplift resistance. SunTuf panels feature 3" vertical corrugation and are designed to match the most popular metal panel profiles. SunTuf's toughness and light weight allow it to cover many outdoor structures and extend living areas, storage, or shelters.

Common applications include:

  • Skylights and sidelights
  • Architectural roofing
  • Industrial roof lights
  • Agricultural greenhouses
  • Car ports
  • Light roofing and awnings
  • Deck covers
  • Pool enclosures
  • Shade canopies
  • Animal shelters
  • Tool sheds
  • Walkway covers
  • Residential roofing: pergolas, canopies, patios, sun rooms, verandas, gazebos, etc.
[CLICK HERE FOR MATERIALS CALCULATOR]

SunTuf Technical Guide [PDF]

SunTuf Installation Guide [PDF]

  • Certain colors are transparent, with up to 90% light transmission
  • Extreme impact and weather resistance
  • Virtually unbreakable
  • Matches most metal panel profiles
  • Hail and wind resistant
  • Blocks 99.9% of harmful UV radiation
  • Will not yellow
  • Easy to work with and install with standard tools
  • Retains optical clarity far better than any other glazing material
  • Can handle extreme climates
  • Self extinguishing
  • Wide service temperature range: -40°F to 212°F
  • Lightweight: less than half the weight of glass
  • Good fire rating
  • 3" vertical corrugation pattern

Product Reviews

Specifications

Material: POLYCARBONATE
Water Absorption: .15% @ 24 hrs
Density: 1.2 g/cm3
Tensile Strength: 9000 psi @ Yield
Tensile Modulus: 345 ksi
Flexural Modulus: 345 ksi
Flexural Strength: 13500 psi
Elongation: 6% @ Yield
Izod Impact Strength: 15 ft-lb/in.
Hardness: R125/M70
Heat Deflection Temp: 270°F
Vicat Softening Temp: 300°F
Linear Expansion Coefficient: 3.6 x 10-5/°F
Dielectric Constant: 3
Dissipation Factor: .9

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.



WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.