As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Clear polycarbonate sheets, known by the trademarked names Lexan, Makrolon, Makroclear and others, are a particular group of thermoplastic polymers. Polycarbonate is a very durable material. Although it has high impact-resistance, it has low scratch-resistance, so a hard coating can be applied for added protection. Polycarbonate characteristics are quite like those of polymethyl methacrylate (PMMA, ACRYLIC), but polycarbonate is stronger and usable in a wider temperature range.
Polycarbonate is a versatile, tough plastic used for a variety of applications, from bulletproof windows to compact disks (CDs).
It comes in transparent and opaque varieties. The main advantage of polycarbonate over other types of plastic is unbeatable strength combined with light weight. Polycarbonate is much lighter than glass, and is nearly unbreakable. Bullet-resistant variations are available and are used in windows and enclosures usually seen inside banks are often made of polycarbonate.
How to Clean Polycarbonate Sheet
General Cleaning 1. Rinse surface with warm water to loosen preexisting dust, dirt and grime. 2. Gently wash surface with a mild soap and a soft microfiber cloth or sponge. 3. Rinse thoroughly with lukewarm water. Dry completely with a soft, dry cloth.
Removing Oil and Tar 1. Rinse with warm water to loosen preexisting dust, dirt and grime. 2. Gently rub surface with a 50/50 isopropyl alcohol and water mixture using a soft, non-abrasive cloth. 3. Immediately rinse material with water and dry using a soft, dry cloth.
Removing Heavy Markings (e.g. graffiti, paint, marker, inks, glazing components) 1. Rinse with warm water to loosen preexisting dust, dirt and grime. 2. Gently rub surface with Naphtha VM&P grade, isopropyl Alcohol, or butyl cellosolve, using a soft, non-abrasive cloth.
Removing Adhesive-Backed Labels 1. Stubborn adhesives can be removed using isopropyl alcohol, Naphtha VM&P grade or kerosene.
Removing Scratches 1. Deep scratches and gouges made by sharp objects such as keys, screwdrivers and knives cannot be repaired. 2. Fine scratches can be cosmetically hidden by using our Novus 2, followed by a polishing agent such as Novus 1.
Special Note: Always rinse edges of polycarbonate with generous amounts of warm water, as the edges of polycarbonate sheet are not protected with an abrasion and chemical resistance hard coating.
What sets Interstate Advanced Materials apart? Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts
What is Interstate Advanced Materials's Shipping Policy? Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.
Is your site secure? Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.
