Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


Polycarbonate Clear Post-Consumer Sheet

Polycarbonate Clear Post-Consumer Sheet

Clear Polycarbonate Renovo-MPC? Is A Sustainable Post-consumer Sheet With The Same Benefits As Extruded Polycarbonate.

SKU: POLCER SH

Select your custom cut sizes:

  inches
  inches
  inches

Options
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

ESTIMATED SHIPPING TO 92111: $29.00
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as 0% for 30 days with

Description

Renovo-MPC? is a tough polycarbonate sheet made from a combination of reclaimed post-consumer and industrial polycarbonate. A closed loop polycarbonate material, Renovo-MPC? offers sustainability and without compromising on the physical properties general-purpose extruded polycarbonate is known for, such as its optical properties, light transmission, and low haze. This lightweight sheet is virtually unbreakable and has superior impact resistance to glass.

Renovo-MPC? is produced domestically and may be used toward LEED Materials and Resources credits in some applications.

[PDF Spec Sheet]

  • Tough, fully sustainable sheet
  • Closed loop post-consumer polycarbonate that retains all of general-purpose polycarbonate's properties
  • Excellent optical clarity
  • May be routed, drilled, and sawed
  • Thermoformable
  • Cold and hot bendable
  • Screen printable
  • Dimensionally stable
  • Usable toward LEED credits in some applications
  • Made in the U.S.A.

Product Reviews

Specifications

Material: POLYCARBONATE
Specific Gravity (g/cc): 1.2
Water Absorption: .15% @ 24 hrs
Tensile Strength: 9000 psi @ Yield
Tensile Modulus: 340 ksi
Flexural Modulus: 345 ksi
Flexural Strength: 13500 psi
Elongation: 110%
Izod Impact Strength: 18 ft-lbs/in., Notched / 60 (no break) ft-lbs/in. Unnotched
Hardness: M70, R118
Compressive Strength: 12500 psi
Compressive Modulus: 345 ksi
Heat Deflection Temp: 270?F @ 264 psi
Self Ignition Temp: 1022?F
UL94 Flammability: HB @ .060", V-0 @ .394"
Linear Expansion Coefficient: 3.75 x 10-5 in./in./?F
Dielectric Constant: 3.17 @ 60 Hz, 2.96 @ 10 Hz
Dissipation Factor: .0009 @ 60 Hz

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.



WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.