×
How To Measure and Cut-To-Size Policy | Close it
Cut-To-Size Items are Non-Returnable!
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Onsrud Plastic Router Bits | Mechanical Plastics
Upcut Spiral, Double-Edge, Solid Carbide "O" Flute
SKU: CMD52 7
Price for (CMD52-703) | 2" Overall Length x 1/4" Shank Diameter | 1/2" Cutting Length x 1/8" Cutting Diameter Qty: 1
ESTIMATED SHIPPING TO 43085: $29.23
Description
Interstate Plastics is proud to offer upcut spiral, double-edge, solid carbide "O" router bits. These double-edged router bits have been developed to cut soft plastic with a smooth finish and upward chip flow thanks to their high helix geometry. Plastic router bits by Onsrud are an industry standard in high-quality featuring outstanding tool longevity, a tendency to stay sharper, a broad selection of sizes and most importantly a superior quality of cut. Onsrud router bits easily cut a variety of machinable plastics as well as materials including wood, plywood, MDF and other wood composites. Router cutters are available in a range of shank sizes. How to Choose a Router Bit:
1. Router bits can cut a material as thick as the length of the flute.
2. Router bits can drill a material as deep as the width of the flute, making multiple passes until the material is fully cut.
3. Bit size is the full diameter and length of the bit. This is different from the flute size, which shows the depth and thickness of the cut.
- Upcut spiral, double-edge router
- Solid carbide material
- Outstanding tool longevity
- Tendency to stay sharper
- Superior quality of cut
- Router cutters are available in a range of shank sizes
Frequently Asked Questions
What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts
What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.
