As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Interstate Plastics is proud to offer straight, single-edge, solid carbide "O" router bits. These flutes combine the fast free-cutting of the "O" flute with the dependable tool life of solid carbide tools. "O" grade router bits work exceptionally well on polycarbonate, polyethylene, polypropylene, polystyrene, PVC, acrylic, HDPE, UHMW and hard plastic. Plastic router bits by Onsrud are an industry standard in high-quality featuring outstanding tool longevity, a tendency to stay sharper, a broad selection of sizes and most importantly a superior quality of cut. Onsrud router bits easily cut a variety of machinable plastics as well as materials including wood, plywood, MDF and other wood composites. Router cutters are available in a range of shank sizes. How to Choose a Router Bit:
1. Router bits can cut a material as thick as the length of the flute.
2. Router bits can drill a material as deep as the width of the flute, making multiple passes until the material is fully cut.
3. Bit size is the full diameter and length of the bit. This is different from the flute size, which shows the depth and thickness of the cut.
Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.
What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.