Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


Natural Ultem 1000 Rod

Natural Ultem 1000 Rod

Unreinforced Polyetherimide, PEI

SKU: PEINEZ RR


Please Call us at (916) 679-5146 for pricing.

ESTIMATED SHIPPING TO 02139: $179
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $9/month with

Description

Ultem 1000 is an amorphous polyetherimide with a high glass transition temperature of 217?C. It exhibits excellent mechanical properties and dimensional stability along with good electrical properties. It is unreinforced, but offers great chemical resistance and innate flame retardant properties. This material is UL94 V-0 rated and ROHS compliant.

  • Great chemical resistance
  • High strength, stiffness
  • Rigid and dimensionally stable
  • RoHS compliant
  • Innate flame retardant properties - UL94 V-0 rated

Product Reviews

Specifications

Material: PEI - ULTEM®
Specific Gravity (g/cc): 1.27
Water Absorption: 1.3% @ Saturation
Density: 1.27 g/cm3
Tensile Strength: 16000 psi
Tensile Modulus: 520 ksi
Flexural Modulus: 510 ksi
Flexural Strength: 24000 psi
Elongation: 60% @ Break
Izod Impact Strength: 1.0 ft-lb/in.
Hardness: R126
Compressive Strength: 21000 psi @ 10% strain
Compressive Modulus: 480 ksi
Heat Deflection Temp: 410?F @ 66 psi / 394?F @ 264 psi
Vicat Softening Temp: 426?F
Melting Point: 422?F
Linear Expansion Coefficient: 3.1 x 10-5 in./in./?F
Dielectric Constant: 3.15
Dissipation Factor: .0013

Frequently Asked Questions

What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts


What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.



WARNING: This product can expose you to chemicals including Carbon CAS 133-86-4, which are known to the State of California to cause cancer. For more information go to?www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.