Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


Kydex<sup>®</sup> T Sheet | Ivory #62015

Kydex® T Sheet | Ivory #62015

Acrylic-polyvinyl Chloride / Thermo-forming Sheet

SKU: KYDV5T1ST

Select your custom cut sizes:

  inches
  inches
  inches

Options
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

Price for " X 48.000" X 96.000" Qty: 1

$143.41


ESTIMATED SHIPPING TO 98109: $26.97
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as 0% for 30 days with

Description

Kydex® sheet is an extremely durable Acrylic-PVC alloy extruded in a range of colors, textures, and patterns. Kydex® thickness ranges from .028 to .250 and full sheets are available in 48" x 96" and 48" x 120 ft rolls. Kydex® can be thermoformed, post formed, brake formed and laminated.

Kydex Product Information [PDF]

Kydex Technical Brief [PDF]

Bonding Kydex® to Kydex® [PDF]

Superior formability, fabrication and tooling quality makes Kydex® the best choice for countless projects. Using standard tools, Kydex® sheets can be drilled, brake formed or punch pressed. Kydex can reduce the number of individual parts needed in many applications, thereby reducing assembly costs. Kydex applications range from aviation and transit interiors, medical equipment and building interiors to furniture and fixtures. Kydex can be used as protection from electrical shock and has multiple equipment housing applications for tools such as electrical welders that require durability and high impact strength. No other thermoplastic sheet stands up to impact, scratches, and gouging like Kydex®.

Common Applications

  • Gun holsters and knife sheaths
  • Thermoformed equipment housings
  • Flat laminated panels of all types
  • Kickplates and pushplates
  • Exhibits and kiosks
  • Aircraft, bus, automotive, and train interior parts
  • Membrane pressed components
  • Work stations
  • Pedestals and stands
  • Furniture components

Cleaning Kydex
Kydex® is very easy to clean: tough stains, scuffs, and graffiti can be removed using strong cleaners with no staining or surface damage to the material. Kydex® sheet will retain its original beauty with routine cleaning and care. To ensure that your part maintains its original appearance, use mild soap and lukewarm water to remove light dirt. To remove heavier dirt or grease from texture valleys, a short stiff bristled brush should be used to loosen the debris and oils followed by a water rinse.

Product Reviews

Specifications

Material: KYDEX®
Specific Gravity (g/cc): 1.35
Tensile Strength: 6100 psi
Flexural Modulus: 360 ksi
Flexural Strength: 9600 psi
Elongation: 110% @ Break
Hardness: R94
Heat Deflection Temp: 168 F @ 264 psi
UL94 Flammability: V-0, 5V

Frequently Asked Questions

What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts


What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.



WARNING: This product can expose you to chemicals including Vinyl chloride, CAS 75-01-4, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.