Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Hydlar<sup>®</sup> Z Abrasion-Resistant Nylon Sheet

Hydlar® Z Abrasion-Resistant Nylon Sheet

Natural Filled Nylon PA66 Sheet


Price for .25 x 12 x 12" Plate Qty: 1


* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $34/month with


Natural Hydlar® Z sheet features excellent wear properties, strength, and stiffness. Easy to machine and with a high load capacity, this aramid-filled material extends part life by minimizing mating surface abrasion. It is best suited for use in the construction industry, as part of conveyor belt technology, for power and mechanical engineering, and for the manufacturing of gears.

  • Excellent wear properties
  • Excellent strength and stiffness
  • Minimizes mating surface abrasion
  • Easily machined
  • High strength plate - good mechanical load capacity

Product Reviews


Material: NYLON
Water Absorption: 0.37% @ 24 hrs.
Density: 1.19 g/cm3
Tensile Strength: 9500 psi
Tensile Modulus: 940 ksi
Flexural Modulus: 638 ksi
Flexural Strength: 16145 psi
Elongation: 4% @ Break
Izod Impact Strength: 0.82 ft-lbs/in.
Hardness: R116
Compressive Strength: 16800 psi @73°F, 10% strain
Compressive Modulus: 359 ksi
Heat Deflection Temp: 470°F
Melting Point: 509°F

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.

Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.