×
How To Measure and Cut-To-Size Policy | Close it
Cut-To-Size Items are Non-Returnable!
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Durasurf ETA UHMW Pressure-Sensitive Tape
50ft Rolls Of Easy To Apply (ETA) Adhesive Backed UHMW Tape
SKU: MSC EAUHMWTAPE
Price for .040x0.5" 50ft Roll Qty: 1
ESTIMATED SHIPPING TO 06828: $68.79
Description
Interstate Plastics' line of UHMW pressure sensitive adhesive backed tapes offer excellent abrasion resistance, low coefficient of friction, high impact strength and high performance properties people have come to expect from UHMW. By providing this exceptional material with an adhesive backing, installation time and costs are significantly reduced. No need for bolts or fasteners, no need to countersink. DuraSurf ETA also reduces scrap by 75%. When a standard 1/4" thick sheet of UHMW is installed using the traditional mechanical fastening method, 3/16" of the material is lost to the bolt head. This leaves only a 1/16" usable wear surface. You can achieve the same result with a 1/16" DuraSurf ETA tape product and eliminate 80% of the time and cost associated with traditional installation methods. Interstate Plastics offers a wide range of both rubber and acrylic based adhesive systems to meet virtually any application requirement. DON'T SEE THE SIZE YOU'RE LOOKING FOR? CALL 888-768-5759. Available thicknesses: 005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm), .050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), .100" (2.5 mm), .125" (3.17 mm) Available widths: All dimensions between 1/4" (6.35 mm) and 24" (610 mm)
- Excellent abrasion and wear resistance
- Very high impact strength
- Meets FDA and USDA guidelines
- No moisture absorption
- Self-lubricating - no need for oils or lubricants
- Excellent noise abatement properties
- Chemical resistance and corrosion resistant
- Maintains performance and properties at -30?C
- Meets ASTM-D-4020-81
- Low coefficient of friction
Frequently Asked Questions
Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.
What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.
