As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Duraclad™ interlocking PVC liner panels are made for environments where standard thin-sheet liners fail. Their specialized 1/2" thick multiwall structure delivers superior structural strength and rigidity compared to standard single-wall PVC liners and fiberglass reinforced panels (FRP). Designed as a rugged, installer-friendly alternative to traditional FRP and drywall, these panels provide a lightweight yet exceptionally tough solution for moisture-prone and demanding interior environments. Duraclad™ utilizes thicker inner walls to resist impact and prevent bowing, all while maintaining a smooth, high-gloss finish. It is a great choice for facilities requiring a 100% waterproof, hygienic surface that is virtually maintenance-free. Looking for more colorful wall cladding options? Take a look at our Palclad Pro HYG panels and FRP panels. Duraclad™ is the ideal choice for high-moisture agricultural and industrial cladding. Unlike thin, single-sheet liners, Duraclad's multiwall design ensures: While both materials are used for sanitary wall cladding, Duraclad™ offers distinct advantages in installation and longevity. Duraclad™ is designed for efficiency, installing directly onto wall studs or over existing surfaces. For optimum performance, use color-matched installation accessories. Components like J-Trim, H-Dividers, and Inside/Outside Corners are designed to house the panel edges for a fully water-tight and professional seal. This material can be cut and drilled using standard woodworking tools. For more information, reference the Duraclad™ Installation Guide. Trusted Industry Expertise When you order from Interstate Advanced Materials, you're accessing an expansive nationwide network of material expertise. Interstate Plastics sources Duraclad™ directly from the manufacturer, ensuring you receive genuine, Made in the USA panels that meet strict RoHS and lead-free compliance standards. Watch: What Are Duraclad™ PVC Interlocking Liner Panels? Advanced Multiwall Cladding: The Rigid Alternative to FRP
Why Choose Duraclad™ Multiwall Panels?
Duraclad™ vs. Traditional FRP: Which Do You Need?
Installation & Accessories
What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
Signup for our Newsletter!
© 2026 Interstate Advanced Materials A Curbell Plastics Company. All Rights Reserved.
Interstate Advanced Materials: 330 Commerce Circle, Sacramento, CA, USA
Curbell Plastics, Inc.: 7 Cobham Drive, Orchard Park, NY 14127
Phone:
888-768-5759
Customer Service Hours: Monday-Friday 9am-5pm PST
Our Locations:
Sacramento, CA |
Hayward, CA |
Los Angeles, CA |
Kent, WA |
Boise, ID |
Austin, TX |
Birmingham, AL |
Des Moines, IA |
Portland, OR
