As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
GENERAL PURPOSE welding rod, usually for extruded plastics. All rods are cylindrical in shape, and cut to 4 ft. lengths for shipping. Coils and additional shapes available by request, call 888-768-5759 for more information. Use the table below to calculate approximate feet per pound:
ABS WELDING ROD - FEET PER POUND APPROXIMATES | ||
---|---|---|
Approximate Feet Per Pound | ||
1/8" (.125") | 5/32" (.156") | 3/16" (.187) |
~189 ft. | ~121 ft. | ~84 ft. |
~47 rods | ~30 rods | ~21 rods |
Approximate Number of 4' Rods Per Pound |
All rods are cylindrical in shape, and cut to 4' lengths for shipping.
Other shapes (Triangular, Flat and Oval) as well as coils and spools available. Please call 888-768-5759 for more information.
Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.
What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.