Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


PEEK Unfilled Natural PolyEtherEtherKetone Tube

PEEK Unfilled Natural PolyEtherEtherKetone Tube

Unfilled Natural PEEK Tube

SKU: PEKNE TR

Price for 1.18" ID x 1.97" OD x 39.5" PEEK Tube Qty: 1

$2,001.70


ESTIMATED SHIPPING TO 92111: $25.82
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as $0.19/month with

Description

Unfilled natural PolyEtherEtherKetone (PEEK) tubes have chemical and hydrolysis resistances similar to PPS, but are resistant to high temperatures and can operate in higher heat areas where PPS cannot. PEEK has a maximum continuous working temperature of 480°F and can retain its physical properties even when continuously exposed to high moisture sources such as steam and hot water. These qualities combined with PEEK's superior chemical resistance make it an effective replacement for metal and stainless steel parts in harsh environments. PEEK is a high strength alternative to fluoropolymers and is a versatile, high performance plastic.

[PDF Spec Sheet]

  • Maximum continuous working temperature of 480°F
  • Excellent resistance to chemicals
  • Very low moisture absorption
  • Good abrasion and wear resistance
  • Highly resistant to thermal degradation - can be used in steam and hot water
  • V-0 flammability rating - low smoke and toxic gas emission when burned

Product Reviews

Specifications

Material: PEEK
Water Absorption: 0.02% @ 24 hrs.
Density: 1.31 g/cm3
Friction Coefficient: 0.20
Tensile Strength: 16000 psi (Yield)
Flexural Modulus: 600 ksi
Flexural Strength: 26000 psi
Elongation: 30% @ Break
Izod Impact Strength: 0.95 ft-lbs/in.
Hardness: M99
Compressive Strength: 3400 psi @ 1% strain
Compressive Modulus: 493 ksi
Heat Deflection Temp: 320°F
Melting Point: 633°F
UL94 Flammability: V0
Dielectric Constant: 2.8
Dissipation Factor: 0.003

Frequently Asked Questions

What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts


What is Interstate Advanced Materials's Shipping Policy?
Our shipping policy can be found here and orders placed for non-cut-to-size stock items typically ship within 3 working days.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.



Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Advanced Materials bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Advanced Materials. Each customer of Interstate Advanced Materials must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Advanced Materials will be safe and suitable for use under end-use conditions.