Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


GRAY PVC SHEET | RIGID PVC TYPE 1 SHEET

GRAY PVC SHEET | RIGID PVC TYPE 1 SHEET

Polyvinyl Chloride

SKU: PVCGE SH

Select your custom cut sizes:

  inches
  inches
  inches

Options
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

ESTIMATED SHIPPING TO 92111: $25.82
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as 0% for 30 days with

Description

Polyvinyl chloride, or PVC for short, is one of the world's most widely used plastics for its extreme versatility. Most PVC produced goes into building and construction applications such pipe, siding, and window profiles. PVC has a great resistance to oils and a low permeability to gases. It is ideally suited for applications where maximum chemical resistance is necessary. Sheets can be welded to produce tanks, trays and troughs. Packaging is another major market for PVC plastic. Rigid PVC is blown into bottles and made into sheet for thermoforming boxes and blister packs. Flexible compounds are made into food wrap. Other markets for PVC plastics include wire and cable coating, flooring, garden hose, and toys.

Gray PVC conforms to ASTM d-1784-95 class 12454-b (formerly type i grade 1) and is manufactured without the use of plasticizers or fillers. It can be used in self supporting construction up to 140?F (depending on chemistry). It exhibits excellent fire ratings (ul-94v-0) and has a flame spread under 20 per ASTM-e-84.

Note: PVC is an industrial grade plastic with no protective masking. Scratches and scuffs on sheets are considered acceptable and are not a valid reason for returning this material.

[PDF Spec Sheet]

  • Good electrical/insulation properties
  • Performance in a wide temperature range
  • Durable with long-life expectancy
  • Cost effective
  • Excellent chemical resistance
  • Light weight, high strength

NEED A PVC SAMPLE?
Thermoplastics Material Sample Pack
Machinable Plastics Material Sample Pack

Product Reviews

Specifications

Material: PVC TYPE I
Specific Gravity (g/cc): 1.38
Water Absorption: 0.04% @ 24H
Tensile Strength: 7200 psi @ Yield
Tensile Modulus: 440 ksi
Flexural Modulus: 440 ksi
Flexural Strength: 11000 psi
Elongation: 5% @ Break
Izod Impact Strength: 2.2 ft-lb/in.
Hardness: 74 (Shore D)
Continuous Operating Temp: 140?F
Heat Deflection Temp: 158?F @ 264 psi
Melting Point: 385?F
UL94 Flammability: V-0
Linear Expansion Coefficient: 3.3 x 10-5 in./in./?F

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.



WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.